You recently bought an HP wireless printer for work. You were glad to get the device at your home or office but unfortunately found yourself that you don’t know how to use the wireless link computer. Don’t worry!Here is the step-by-step guideline that suits you in performing HP Wireless Printer Setup on your own. Just go through the entire procedure step-wise and done the given task quickly and effortlessly.
Methods To Do HP Wireless Printer Setup
Below are few possible methods that you can try one-by-one. Instead of trying them all accordingly, just work your way down until you find the one that works for you. Have a glimpse on the noted points and let’s begin your work:
And For more information visit official website: https://www.hpconnected.com/us/en/wireless-printing/connecting-your-wireless-printer
Method 1: HP Auto Wireless Connect
Some newer printers can connect your printer to your wireless network automatically, but without any cables. To use this method, not only your printer should be a newer model but also your computer has to meet the following requirements.
· Your computer uses Windows 7/8/10
· Your computer uses a wireless connection to your network and the computer can control the wireless adapter
· Your computer is connected to your network
· Your computer uses a dynamic IP address
Now, follow the given instructions:
· Search and download the printer software from its official site. Make sure that the right printer you identify
· Now, run the software
· Turn-on your HP printer
· In your computer, follow the on-screen instructions until you are driven to Connection Type
· Select “Wireless”, then click “Yes, send my wireless settings to the printer”
· Wait for the connection and then complete the setup process by following the rest of the on-screen instructions
Method 2: Wireless Setup Wizard
To do it, go through the below-noted points:
· Open your printer and hit the wireless icon
· Select “Wireless Settings” and then click Wireless Setup Wizard
· Follow the steps prompted on your printer screen
· Select your wireless network name and hit “Next
· Enter the password of your wireless network
· Press “OK” to confirm the settings
Method 3: Wi-Fi Protected Setup
This method requires your HP printer support WPS pushbutton mode, and your wireless router must have a physical WPS pushbutton. Follow these steps:
· Open your printer and start the WPS pushbutton mode on it
· Within couple of minutes, press the WPS button on your wireless router
Contact Dexterous Engineers For One-Stop Remedy
If you are facing any difficulties while following the above steps, you need to immediate contact our well-educated and qualified technicians via placing an instant ring. They will cover up all your requirements within a couple of seconds. Hence, get efficient ideas of doing HP Printer Setup by one call. Give a call on the helpline number and stay tune with tech-specialists.